Mr. BegallTo：Jinan FAST CNC Machinery PLC Dear Sir， With the letter we would like to thank for your cooperation in the successful installation, testing and commissioning of High Speed CNC Drill Of First in its kind Ethiopia ， that would enable us do many works especially sugar product tube plate holes of various deameters and thickness. ... With Regards
KLF691 Woodworking Edgebander For PVC Tape And Wood Strip Tape Popur In International Markets Edge Banding Machine
|Port||Qingdao Port||MOQ||1 SET|
|Service||24 Hours Online Services||Voltage||380V/50Hz/200Hz|
|Certificate||ISO9001||CNC Or Not||CNC|
|Manufacture||OEM ODM Acceptable||Weight (KG)||2600 Kg|
|Power||18.4 KW||Feed Speed||20~26m/min|
High Speed Edgebanding Machine FV691
The gluing unit features quick melt and an application device that guarantees perfect glue quality on different edge materials.
Temperature adjustable by control. When the edgebander is running without workpiece, the system automatically stops heating up the glue.
The trimmed edge is always finished with a clean cut thanks to the precision linear guide and the high speed motors.
Quick changeover between different edges can be easily realized by clicking on the touchscreen.
4 motors that travel in a reciprocating motion to clean and buff the workpiece.
|SERIES||Spray Release Agent||Pre Milling||Gluing||End Trimming||Rough Trimming||Fine Trimming||Corner Trimming||R1 Trimming||R2 Trimming||Flat Trimming||Spray Cleaning Agent||Buffing|
|FV691G||·||·||··||·(High Speed)||·||·||·(High Speed)||·||·||·||·||·(Air Cylinder controlled)|
|FV690||·||·||·||·(High Speed)||·||·||·||·||·||·||·(Air Cylinder controlled)|
|SERIES||Machine Dimension (L*W*H)mm||Power||Feed Speed||Electrics||Edge Thickness||Workpiece Thickness||Workpiece Length||Workpiece Width||MinimumWorkpiece Dimensions|
Top pre-melter reduces heating time and increase the quality of edgebanding.
Servo Tape Magazine
Four wheel tape magazine automatically changes edge with servo motor.
The process is both accurate and swift.
One big precision roller and 5 small to make sure the edge is pressed seamlessly to the workpiece.
The big roller and gluing rollers press simultaneously. The 5 small rollers consist of 1 cylinder shaped and 4 cone shaped rollers. The latter further ensures that the edge is properly pressed to the workpiece.
All rollers have their independent pressure control valve.
Double V-belt Top Pressure System
This device spray-applies a thin coat of release agent to upper and lower edge area of the workpiece and prevent squeezed out glue from adhering to the workpiece.
Hot Air Edgebanding Technology
Available Upon Request
Zero glue line, Minimum heating time required, water-resistant, saving the trouble of cleaning the glue pots
To be used with edges with PVC, ABS, PP, PMMA or melamine coating.
Double Glue Reservoirs
Available Upon Request
Two glue reservoirs to quickly switch between colors and to achieve invisible joint.
Corner Trimming Unit
With 4 motors, this device works well with various edge thickness and invariably result in perfect round corner.
Equiped with diamond tools for better cut and longer use
This device removes the burr or unevenness on the edge of the workpiece, leaving a smooth surface for the edgebanding.
Profiling unit available upon request.